IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 135

NOTE: If you use HTML configuration, you will need to go to the
"Network Configuration" HTML form
(i.e., http://IPaddress/networkConf.html;
e.g., http://192.75.11.9/networkConf.html)
and look under the "Novell" section. The settings in the
following step are found there. If using a Telnet session,
you will need to manually execute the commands listed in
the next step.
2. Store the RPRINTER settings on the Ethernet Interface. This
will refer to an existing PSERVER.NLM on the file server or to
one that you will create later in these steps.
Syntax:
store rprinter add PSERVERname printernumber
EthernetInterfacedestination
An example for an RPRINTER servicing printer 0 of the
PSERVER.NLM called pserver1 and sending jobs to the
Ethernet Interface destination d1prn is:
store rprinter add pserver1 0 d1prn
3. Leave this Ethernet Interface login session and log on to the
NetWare 3.x file server as "Supervisor."
4. Load a PSERVER.NLM if one is not already loaded. This will
be the PSERVER that the Ethernet Interface services as an
RPRINTER, so it must match the PSERVER name given in
step 2.
5. Enter PCONSOLE.
6. Select "Print Queue Information" from the PCONSOLE Main
Menu.
7. Press INSERT to add a new queue to the list of currently
defined queues.
8. Type in the name of this new queue when prompted, and press
ENTER. This can be any name you would like.
9. Click ESCAPE to return to the Main Menu.
10. Select "Print Server Information" and press ENTER.
11. Press INSERT when the list of existing print servers displays.
NetWare Version 3.x RPRINTER Setup
135