IBM 4400-006 - 4400 Model 006 B/W Direct Thermal User Manual page 176

Chapter 7
Troubleshooting (10/100Base-T)
•
Is the timeout option in the CAPTURE command set high
enough so the printer does not time out before the print
processing has had a chance to complete? This can be a
problem with graphic jobs.
•
When garbled data persists, consider the following:
•
•
For additional information on these suggestions, please refer to
your Netware user manuals.
176
tab expansion (xtab) set on (in a model) with graphic jobs
the correct driver for the printer if printing from within
Windows