Safety inspection
Instructions
Perform this safety inspection before performing any of the following tasks:
v Accept a machine for service agreement
v Provide per-call service
v Relocate a machine
v Review changes or attachments on any IBM machine that is leased, on service agreement, or on per-call
service
Ensure that you correct unsafe conditions before you continue.
Possible safety hazards are:
v Electrical—An electrically charged frame, or exposed wires or connections, can cause serious electrical shock.
v Mechanical—A missing safety cover or shield is hazardous. Moving parts, such as gears, shaft, and pulleys
are hazardous.
v Chemical—Use only approved cleaning agents. Do not use other solvents or chemicals.
Reference items
You will need the following items:
v A copy of the machine EC history
v A list of current safety ECs
v IBM Electrical Safety for IBM Customer Engineers , S229-8124
Safety inspection procedure
1. Turn off and unplug the printer.
2. Check exterior covers for damage (loose, broken, or sharp edges).
3. Check top main cover interlock operation (see T&D13—Top cover interlock test).
Safety and environmental notices
10