Troubleshooting Config-Sync Issues; Commit Failure - Cisco N5K-M1600 - Expansion Module - 6 Ports Troubleshooting Manual

S e n d d o c u m e n t c o m m e n t s t o n e x u s 5 k - d o c f e e d b a c k @ c i s c o . c o m .

Troubleshooting Config-Sync Issues

This chapter describes how to identify and resolve problems that can occur with config-sync in the Cisco
Nexus 5000 Series switch.
This chapter includes the following sections:
•
•
•
•
•

Commit Failure

Use the show switch-profile status commit command to view commit status.
Commit failure has many possible causes:
•
•
•
•
Note When a commit fails, commands that were entered under SP are still stored in the SP buffer. Do not
configure these commands under SP again. After correcting the cause of the failure, only the commit
needs to be executed.
Command Parsing Failed
Possible Cause
Appropriate conditional feature(s) are not enabled.
Solution
Ensure that appropriate conditional feature(s) are enabled.
OL-25300-01
Commit Failure
Import Failure
Merge Failure
Switch-profile Deletion Failure
Verify Failure
Command Parsing Failed
Verify failed
Commands that failed commit
Another session in progress
9
C H A P T E R
Cisco Nexus 5000 Series Troubleshooting Guide
9-1