Menu Settings Table - Oki ML620 User Manual

Menu Settings Table

For a complete explanation of each menu item, see "Explanations of Menu Items" later in this chapter.
The table below shows the items which may appear in the menu. Settings which are engaged at the factory
(defaults) are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged,
as noted.
MENU SETTINGS TABLE
Group Item
Printer Emulation Mode
Control
Font Print Mode
Draft Mode
Pitch
Function
Selects the printer command set
(emulation) you want to engage.
Choose the quality and typeface of
printing. Switch to NLQ Courier or
NLQ Gothic for Near Letter Quality
printing. If you are printing draft-
type documents, select DRAFT,
then select either HSD or SSD
under DRAFT Mode. Both of these
Items are in the Font Group.
Applies only when the Print Mode
is set to DRAFT. Selects the draft
mode to be used: HSD (High
Speed Draft) or SSD (Super Speed
Draft).
Choose the character width, in
characters per inch (cpi).
Settings (defaults are set in bold italic)
IBM PPR, Epson FX, ML
Draft, NLQ Courier, NLQ Gothic, NLQ
OCR-B, HSD, SSD
HSD, SSD
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20
cpi
ML620/ML621 User's Guide