Table of Contents
Advertisement
This choice is on the full and limited Setup utility menu.
– Set Power-on Password: Select this choice to set or change a power-on password. For more
information, see
"Power-on password" on page 109
– Clear Power-on Password: Select this choice to clear a power-on password. For more information,
see
"Power-on password" on page 109
– Set Administrator Password: Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it limits access to the full
Setup utility menu. If an administrator password is set, the full Setup utility menu is available only if you
type the administrator password at the password prompt. For more information, see
password" on page
– Clear Administrator Password: Select this choice to clear an administrator password. For more
information, see
"Administrator password" on page
• Save Settings
Select this choice to save the changes that you have made in the settings.
• Restore Settings
Select this choice to cancel the changes that you have made in the settings and restore the previous
settings.
• Load Default Settings
Select this choice to cancel the changes that you have made in the settings and restore the factory
settings.
• Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the changes that you have made in
the settings, you are asked whether you want to save the changes or exit without saving them.
Passwords
From the User Security menu choice, you can set, change, and delete a power-on password and an
administrator password.
The User Security choice is on the full Setup utility menu only.
If you set only a power-on password, you must type the power-on password to complete the system startup
and to have access to the full Setup utility menu.
An administrator password is intended to be used by a system administrator; it limits access to the full Setup
utility menu. If you set only an administrator password, you do not have to type a password to complete the
system startup, but you must type the administrator password to access the Setup utility menu.
If you set a power-on password for a user and an administrator password for a system administrator, you
must type the power-on password to complete the system startup. A system administrator who types the
administrator password has access to the full Setup utility menu; the system administrator can give the user
authority to set, change, and delete the power-on password. A user who types the power-on password has
access to only the limited Setup utility menu; the user can set, change, and delete the power-on password, if
the system administrator has given the user that authority.
Power-on password
If a power-on password is set, when you turn on the server, you must type the power-on password to
complete the system startup. You can use any combination of 6 - 20 printable ASCII characters for the
password.
for more information.
111.
for more information.
111.
Chapter 3
"Administrator
.
Configuring the server
109
Advertisement
Table of Contents
