Step 3. Installing The Junos Enhanced Services Software; Step 4. Adding Licenses With The J-Web Interface; Basic Connection And Configuration With The Cli; Step 1. Connecting, Logging In, And Starting The Cli - Juniper JUNOS J Series Quick Start Manual

JUNOS Enhanced Services J-series

Step 3. Installing the JUNOS Enhanced Services Software

For information explaining how to install the JUNOS Enhanced Services software if
your Services Router is running JUNOS software, see the JUNOS Enhanced Services
Migration Guide. For information explaining how to upgrade the software if you have
already installed the JUNOS Enhanced Services software, see the JUNOS Enhanced
Services Administration Guide.

Step 4. Adding Licenses with the J-Web Interface

If you purchased one or more licenses, you received an envelope with instructions
for obtaining license keys from the Web. To enable each license on the router, you
must add the license key. You can add one or more license keys. To add a license
key and enable a license:
1.
2.
For complete instructions, see the JUNOS Enhanced Services J-series Services Router
Getting Started Guide.

Basic Connection and Configuration with the CLI

For CLI access, you connect from your management PC or laptop to the Services
Router through the console port. (For information about the CLI, see JUNOS Enhanced
Services CLI Basics" on page 15.)

Step 1. Connecting, Logging In, and Starting the CLI

You are prompted for a username and password. The default username is
Because no password is initially required, press Enter at the password prompt for a
first-time login.
To access a Services Router with the CLI:
1.
2.
3.
12
Basic Connection and Configuration with the CLI
Services Router Quick Start
Follow the instructions in your license envelope to generate the license key from
the Web site.
Copy the license key onto the router with the J-Web interface:
Click Manage>Licenses.
a.
Enter the license key in one of the following ways:
b.
In the License File URL box, type the URL for the license key Web site.
Copy the license key text, and paste it into the License Key Text box,
separating multiple license keys with a blank line.
Click OK.
c.
Turn off power to the management PC or laptop.
Connect one end of the console cable to the serial port adapter, plug the adapter
into a serial port on the PC or laptop, and plug the other end of the cable into
the console port on the Services Router.
Turn on power to the PC or laptop.
.
root