Acx500 Timing Server Specifications; Requirements And Specifications For Installing A Gnss Antenna - Juniper ACX500 Hardware Manual

ACX500 Timing Server Specifications

IN THIS SECTION

Requirements and Specifications for Installing a GNSS Antenna | 108

Requirements and Specifications for the Recommended GNSS Antenna | 118
Requirements and Specifications for Installing a GNSS Antenna
IN THIS SECTION
Requirements for Installing a GNSS Antenna | 109
ACX500 Router GNSS Antenna Signal Gain Requirements | 109
General ACX500 GNSS Antenna Mounting and Installation Recommendations | 110
Tools and Parts Required to Install the GNSS Antenna | 114
Installing the ACX500 GNSS Antenna | 115
ACX500 GNSS Antenna Power Specification | 116
ACX500 GNSS Antenna Surge Protection | 117
Antenna Installation Verification | 117
This section describes the guidelines and procedure for installing a global navigation satellite system
(GNSS) antenna to ensure an optimal signal reception. The ACX500 routers use the GNSS signals for
timing and synchronization features.
NOTE: The GNSS port and LEDs on the ACX500 router chassis are labeled GPS.
Consider the following guidelines before you install the GNSS antenna:
• RF site survey for antenna location
• RF environment details, such as transmission source and proximity
108