Connecting And Configuring An Ocx1100 Switch (Cli Procedure) - Juniper OCX1100 Hardware Manual

OCX1100 Switch Hardware Guide
Related
Documentation

Connecting and Configuring an OCX1100 Switch (CLI Procedure)

100
}
et-0/0/51 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ocx1100-48sx
}
}
}
}
et-0/0/52 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ocx1100-48sx
}
}
}
}
et-0/0/53 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ocx1100-48sx
}
}
}
}
et-0/0/54 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-ocx1100-48sx
}
}
}
}
}
Connecting and Configuring an OCX1100 Switch (CLI Procedure) on page 100
You can connect and configure an OCX1100 switch through the console by using the CLI.
Before you begin connecting and configuring an OCX1100 switch, set the following
parameter values on the console server or PC:
Baud rate—115,200
Flow control—None
Data—8
Copyright © 2017, Juniper Networks, Inc.