Configuring A Switch As A Dhcp Server (Cli Procedure) - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches
Table 5: DHCP Service Configuration Pages Summary for EX4300 Switches (continued)
Field
Logical System Name
Option-60
Routing Instance Name
Option-82
Circuit Identifier
Remote Identifier
Domain Name
User Prefix
Delimiter
Related
Documentation

Configuring a Switch as a DHCP Server (CLI Procedure)

14
Function
Specifies that the logical system name that is
linked with the username during the subscriber
authentication process.
Specifies the payload of Option 60 (Vendor
Class Identifier) from the client PDU be linked
with the username during the subscriber
authentication process.
Specifies the routing instance name that is
linked with the username during the subscriber
authentication process.
Specifies the name of the client used by the
DHCP server to index its database of address
bindings. The name must be unique to the client
within the subnet on which the client resides.
Specifies the remote ID option in the client.
Specifies the domain name that clients must
use to resolve hostnames.
Specifies the prefix to the username as defined
by the user.
Specifies a character that separates
components that make up the username.
Understanding DHCP Services for Switches on page 3
Monitoring DHCP Services
NOTE: This topic applies to Junos OS for EX Series switches and QFX Series
switches with support for the Enhanced Layer 2 Software (ELS) configuration
style. If your switch runs software that does not support ELS, see Configuring
a DHCP Server on Switches (CLI Procedure). For ELS details, see Getting
Started with Enhanced Layer 2 Software.
A Dynamic Host Configuration Protocol (DHCP) server provides a framework to pass
configuration information to client hosts on a TCP/IP network. A switch acting as a DHCP
Your Action
To enable this option, select the check box.
To enable this option, select the check box.
To enable this option, select the check box.
To enable this option, select the check box.
To enable this option, select the check box.
Type the domain name.
Type the prefix.
Type the delimiter.
Copyright © 2017, Juniper Networks, Inc.