Ricoh MP C307 Field Service Manual page 977

3.SP Mode Tables
1001
As of 15S models, the Login User Name can be displayed on the operation panel. The user
ID type displayed on the operation panel can be changed by configuring BitSwitch #12-5 as
follows:
- 0 (Default): Login User Name
- 1: User ID. If this is enabled, User ID will be displayed, which is equivalent to the
behavior exhibited in 14A and earlier models.
Ai r Print
bit 6
For 15S and later models that support AirPrint, AirPrint can be disabled by changing this
Bit Switch from 0 (default) to 1.
bit 7 Not Used
1003 [Clear Setting]
001 Initialize System
003 Delete Program
1004 [Print Summary]
001 Service Summary
1005 [Display Version]
002 Printer Version
1101 [ToneCtlSet]
001 Tone (Factory)
Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous setting, or
c) the current setting.
1102 [Resolution Settings]
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk (*) shows which
mode is set.

00: *1200x1200Photo

01: 600x600Text

02: 1200x1200Text

03: 1200x600Text

04: 600x600Photo
362
Initializes settings in the System menu of the user mode.
DFU
Prints the service summary sheet (a summary of all the controller settings).
Displays the version of the controller firmware.
Bit Switch
Rev. 02/01/2017
Enabled Disabled
-