Ricoh MP C307 Field Service Manual page 971

3.SP Mode Tables
1001
bit [PCL5e/c.PS]: PDL Auto Switching
3
Enables/disable the MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL switching is
disabled, these jobs will not be printed properly.
bit Color balance switching
4
This BitSwitch can be used to restore the color balance to match that of previous models. If this
BitSwitch is set to "1" (Enabled), the color balance from 09A and Extended 09A models will be
used.
bit DFU
5
bit DFU
6
DFU
bit
7
1001
003 Bit Switch 3
bit 0 DFU
bit 1 DFU
bit 2 [PCL5e/c]: Legacy HP compatibility
Uses the same left margin as older HP models such as HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed to
"<ESC>*r1A".
bit 3 to DFU
7
1001
004
1001
005 Bit Switch 5
Show "Collate Type", "Staple Type" and "Punch
bit
0 Type" buttons on the operation panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type from the
operation panel. The available Types will depend on the device and configured options.
After enabling this BitSwitch, the settings will appear under:
356
Bit Switch 4
bit 0 to 7
Bit Switch
Enable
Disabled
-
-
-
Bit Switch
Bit Switch
DFU
Bit Switch
0
Disabled
Disable
Enabled
-
-
-
0 1
- -
- -
Disabled Enabled
- -
0 1
- -
1
Enabled