Ricoh MP C307 Field Service Manual page 1175

No. Function
0-3 IP Fax delay level setting
Selects the acceptable delay level.
Level 0 is the highest quality
Default is "0000" (level 0).
Bit 3
0
0
0
0
4-7 IP Fax preamble wait time setting
IP Fax Switch 02 (SP No. 1-111-003)
No. Function
0 IP Fax bit signal reverse setting
0: Maker code setting
1: Internal bit switch setting
1 IP Fax transmission speed setting
0: Modem speed
1: No limitation
2 SIP transport setting
0: TCP
1: UDP
3 CCM connection
0: No CCM connection
1: CCM connection
4 Message reception selection from
non-registered SIP server
0: Answer
Bit 2 Bit 1
0 0
0 0
0 1
0 1
Comments
When "0" is selected, the bit signal reverse method is decided by
the maker code.
When "1" is selected, the bit signal reverse method is decided by
the internal bit switch.
When communicating between IP Fax devices, LSB first is
selected.)
Selects the transmit speed for IP Fax communication.
This bit switch sets the transport that has priority for receiving IP
Fax data.
This function is activated only when the sender has both TCP and
UDP.
When "1" is selected, only the connection call message with H.323
or no tunneled H.245 is transmitted via CCM.
0: This answers the INVITE message from the SIP server not
registered for the machine.
1: This does not receive the INVITE message from the SIP server
Comments
Bit 0
0
1
0
1
Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary switch combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
4.Service Tables
Level 0
Level 1
Level 2
Level 3
93