Ricoh MP C307 Field Service Manual page 1055

1st level
Legal information
Software Version
List
Screen Device Server Settings
Settings
Application Settings
Authentication
priority mode
Screen device
always-connection
Menu level
2nd level
Open source
licenses
Port number
Authentication
priority mode
Start time(hhmm)
Expiration
time(hours)
3rd level
•
Interface Settings
•
Wi-Fi settings (ON/OFF)
Displays the open source license information.
Displays the versions of control panel
firmware and installed applications.
When saving the software version list on an
SD card, insert an SD card into the SD card
slot of the control panel, and then press [Save
to SD Card].
Input a port number for communication with
the import/export and RFU server. The input
number is used for both HTTP and HTTPS
connections.
(Normally, input a number within 55101-
55111.)
Displays a list of installed applications.
If you press [Settings] for an application, the
setting screen for the CE is displayed. The
screen does not change if the application has
no setting items.
This setting gives priority to the recovery time
from energy saving modes when an IC card
authentication device is connected.
When this setting is selected, the MFP does not
enter Engine OFF mode, and always recovers
from Silent mode.
You can specify the start time of
Authentication priority mode.
Note: This can be changed only when
[Authentication priority mode] is deselected.
You can specify the period of validity of
Authentication priority mode.
Note: This can be changed only when
[Authentication priority mode] is deselected.
This setting prevents the control panel from
entering Sleep mode, so that Bluetooth and
3.System Maintenance
Description
39