Ricoh MP C307 Field Service Manual page 1155

No Function
0* Printing while a paper cassette is pulled out, when the Just Size
Printing feature is enabled.
0: Printing will not start
1: Printing will start if another cassette has a suitable size of paper,
based on the paper size selection priority tables.
1- Not used.
7
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 07 (SP No. 1-103-008)
No Function
0 Not used.
1 Selects the 95% reduced
printing function for letter
size.
2- Not used.
3
4 Receiver name printed on
the transmission result
report
5- Not used.
7
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function
0* Paper size selection priority
0: Width
1: Length
1* Paper size selected for printing
Comments
Do not change the settings.
0：OFF Not reduced printing
1：ON Only when printing letter size, performs 95% reduced printing of
the entire image (in both of main and sub directions) Report printing and
printing from the bypass tray are excluded.
Do not change the settings.
Selects the printing target on the transmission result report.
0: All receivers
1: Printing only receivers which have received fax transmission.
Do not change the settings.
Comments
0: A paper size that has the same width as the received data is selected
first.
1: A paper size which has enough length to print all the received lines
without reduction is selected first.
This switch determines which paper size is selected for printing A4
4.Service Tables
Comments
Cross reference
Just size printing on/off – User
switch 05, bit 5
Do not change the settings.
73