Ricoh MP C307 Field Service Manual page 1096

1.Installation
4.
Press [Connection Test] to check the connection with the client-side machine.
If an error message is displayed, check the network connection with the client-side machine and make sure
that the IP address of the client-side machine is correct.
5.
Press [OK] after "Connection Test" has been successfully done.
6.
Press [Exit] to terminate the System Settings.
Registering the Remote Machine
• First register the Client-side Machine in the Remote Machine before doing this procedure. Otherwise,
registering the Remote Machine fails.
• Only one machine can be registered as the Remote Machine.
14