Ricoh MP C307 Field Service Manual page 1089

13. Open the line and telephone connector covers [A] with a flat-head screw driver.
14. Reassemble the machine.
15. Make two loops with the telephone cord, and then attach the ferrite core [A].
16. Connect the end of the telephone cord with the ferrite core to the "LINE" jack.
17. Attach the EMC Address Decal at [A] on the rear cover (EU only).
18. Plug in the machine and turn the main power ON.
• After you turn the machine on, if you see a message that tells you that the SRAM has been
formatted due to a problem with SRAM, turn the machine off and on again to clear the message.
19. Enter the "User Tools" mode and set date and time.
20. Do SP3-102-000 in the fax SP mode and enter the serial number for the fax unit.
1.Installation
7