Ricoh MP C307 Field Service Manual page 1095

1.
Insert the SD card (Fax Connection Unit Type M28) SD slot 2 (lower) with its label face towards the front of
the machine. Then push it slowly into SD slot 2 (lower) until you hear a click.
2.
Plug in, and then turn ON the main power.
3.
Move the Fax Connection Unit application from the SD card in SD slot 2 (lower) to the SD card in SD slot 1
(upper) with SP5-873-001.
4.
Turn OFF the main power.
5.
Remove the SD card from SD slot 2 (lower), and then keep it in a safe place (see "SD Card Appli Move" in
the field service manual for the mainframe).
6.
Attach the SD card slot cover, and then turn on the machine (
7.
Turn ON the main power.
8.
Press [Firmware Version] in the [Administrator Tools].
[User Tools] > [Machine Features] > [System Settings] > [Administrator Tools]
9.
Check whether the aics version is displayed.
Registering the Client Machine(s)
• Do not register the Remote Machine in the Client-side machine before the Client-side Machine is
registered in the Remote Machine. Otherwise, registering the Remote Machine fails.
On the Remote Machine:
1.
Press [User Tools] > [Machine Features] > [System Setting] > [Administrator Tools].
2.
Press [Program/Change/Delete Remote Machine].
3.
Press one of the machine registration lines, and then enter the IP address or host name of one of the Client-
side Machines.
x 1).
1.Installation
13