1.Installation
6.
Press [OK] after "Connection Test" has been successfully done.
7.
Press [Exit] to terminate the System Settings.
Configuring the Remote Reception Settings
Do the following procedure to enable the Client-side Machine(s) to receive faxes via the Remote Machine. You
can forward or route received documents per line or special sender.
•
By performing procedures described above (Installing the application in the Remote Machine and
Client-side Machine, Registering the Client-side Machine(s), Registering the Remote Machine), the
Client-side Machines can send faxes via the Remote Machine. The procedures shown below are
necessary to enable the Client-side Machines to receive faxes.
On the Remote Machine:
1) If you use "Remote Reception Setting per Line"
1.
Press [Facsimile Features].
2.
Press [Remote Reception Setting per Line] in [Reception Settings].
3.
Enter an IP address or a host name of the client-side machine to connect.
4.
Press [Set], and [Exit] to exit from the setting.
2) If you use "Remote Reception per Sender"
1.
Press [Facsimile Features].
2.
Press [Program Special Sender] in [Reception Settings].
16