Ricoh MP C307 Field Service Manual page 991

3.SP Mode Tables
No. Part Name
9 ITB Contact
Motor
10 ID sensor
11 ID Sensor
Shutter
Solenoid
- -
- -
- -
376
SP Name SP
No.
035
Image Transfer 5-
Contact Motor 804-
033
TM/ID Sensor: 5-
Front 804-
071
TM/ID Sensor: 5-
Center 804-
072
TM/ID Sensor: 5-
Rear 804-
073
5-
TM Sensor
Shutter 804-
Solenoid 021
Toner End 5-
Sensor Power 804-
039
ID Tag: Power 5-
Supply Control 804-
042
Toner Sensor 5-
Power 804-
043
If you execute this SP, the ITB roller halts at a position
which is not at the home position (separated from the ITB).
If you remove or install the PCDU or the ITB unit
immediately after the motor is switched ON/OFF with this
SP, the drums and ITB may be damaged.
Before you remove/install the PCDU or the ITB unit,
initialize the machine with turning the main power OFF/ON
or opening/closing the front door.
After the motor is turned ON with this SP, it is turned OFF
automatically in about 30 seconds.
If you repeat turning OFF and ON continuously, the
temperature of the solenoid rises. It can wrinkle the ITB near
the solenoid.
Remark