Ricoh MP C307 Field Service Manual page 1154

4.Service Tables
0* Length reduction of received data
0: Disabled
1: Enabled
1- Not used
3
4 Page separation setting when sub scan
to compression is forbidden
7 00-0F (0-15 mm: Hex)
Default: 6 mm
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 04 (SP No. 1-103-005)
No Function
0 Maximum reducible length when length reduction is enabled with switch 03-0 above.
to [Maximum reducible length] = [Paper length] + (N x 5mm)
4 "N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4
0
0
0
1
For A5 sideways and B5 sideways paper
[Maximum reducible length] = [Paper length] + 0.75 x (N x 5mm)
5 Length of the duplicated image on the next page, when page separation has taken place.
6
Bit 6
0
0
1
1
7 Not used.
Printer Switch 05 - Not used (do not change the settings)
Printer Switch 06 (SP No. 1-103-007)
72
Bit 3 Bit 2
0 0
0 0
0 1
1 1
Bit 5
0
1
0
1
Do not change the setting.
0: Incoming pages are printed without length reduction.
(Page separation threshold: Printer Switch 03, bits 4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04, bits 0 to 4)
Do not change the settings
Page separation threshold (with reduction disabled with
switch 03-0 above).
For example, if this setting is set to "10", and A4 is the
selected paper size:
If the received document is 10 mm or less longer than A4,
then the 10 mm are cut and only 1 page prints.
If the received document is 10 mm longer than A4, then the
document is split into 2 pages.
Comments
Bit 1 Bit 0
0 0
0 1
0 0
1 1
Setting
4 mm
10 mm
15 mm
Not used
Setting
0 mm
5 mm
20 mm
155 mm