Ricoh MP C307 Field Service Manual page 1044

2.Mechanism
No. Name
1 Function keys
2 System
messages key
3 [Application
List] key
4 [Stop] key
5 [Menu] key
6 [Home] key
7 [Back] key
8 [Check Status]
key
28
Users can assign shortcuts for each application. Up to three applications can be
assigned as shortcuts. When an application is assigned as a function key, users can call
the application from any screen. The function keys are disabled by default. Users must
enable this function to be able to allocate applications to function keys.
System messages are displayed in this area. If there are multiple messages to be
displayed, they are displayed in rotation. Tapping the message opens a dialog which
shows all the messages.
Displays the list of installed applications.
Stops the scanning of a document, fax transmission, or printing to paper.
Displays the menu screen of the application in use. May not be available depending on
the application.
Displays the Home screen.
Use this to go back to the previous screen when the Screen Features screen or the
screen of an application is displayed.
You can check the status of the MFP, each function, and the current job. You can also
check the job history and maintenance information of the MFP.
Description