Ricoh MP C307 Field Service Manual page 1143

2- Not used
3
4- Interval for preventing the machine
5 from entering Energy Saver mode if
there is a pending transmission file.
Bit 5 Bit 4
0 0
0 1
1 0
1 1
6- Not used
7
System Switch 16 (SP No. 1-101-023)
No Function
0 Parallel
Broadcasting
0: Disabled
1: Enabled
1- Not used
7
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 (SP No. 1-101-026)
No Function
0- Not used
5
6 Extended scanner page
memory after memory
option is installed
0: Disabled
1: Enabled
7* Special Original mode
0: Disabled
Use this setting if an external telephone has to be used when
the machine is in the Energy Saver mode.
Do not change these settings.
If there is a file waiting for transmission, the machine does not
go to Energy Saver mode during the selected period.
After transmitting the file, if there is no file waiting for
transmission, the machine goes to the Energy Saver mode.
Setting
1 min
30 min
1 hour
24 hours
Do not change the settings.
Comments
1: The machine sends messages simultaneously using all available ports during
broadcasting.
NOTE: If a customer wants to keep a line available for fax reception or other
reasons, select "0" (Disable).
Do not change these settings.
Comments
Do not change the settings.
0: After installing the memory expansion option, the scanner page memory is
extended to 4 MB from 2 MB.
1: If this bit is set to 1 after installing the memory expansion option, the
scanner page memory is extended to 12 MB. But the SAF memory decreases
to 18 MB.
1: If the customer frequently wishes to transmit a form or letterhead which
has a colored or printed background, change this bit to "1". "Original 1" and
4.Service Tables
61