Fan/ Board - Ricoh MP C307 Field Service Manual

No. Part Name
6 Development
Clutch (K)

Fan/ Board

Input Check
No. Part Name
1 Duplex entrance sensor
2 Right cover switch
3 Paper exit sensor
4 Duplex exit sensor
SP Name SP
No.
Bk Drum 5-
Motor: Low 804-
Speed 023
Bk Drum 5-
Motor: Standard 804-
Speed 2 090
Bk Drum 5-
Motor: Middle 804-
Speed 093
Development 5-
Clutch: Bk 804-
026
Fusing Fan: Lock
Laser Unit Fan: Lock
PSU Fan: Lock
PCDU Cooling Fan: Lock
abnormal stop, for example JAM, if the drum motor (K) is
turned ON with these SPs, the K drum and ITB drive. At
this time, the color drums have stopped but the color drums
are in contact with the ITB. Therefore the color drums and
the ITB may be damaged.
In addition, if keeps ON for a long time, the cleaning blade
can be distorted. When you keeps ON with the ITB unit
installed, make sure to do it within 10 seconds.
SP Name
3.SP Mode Tables
Remark
SP No.
0
5-803-032 Lock
5-803-033 Lock
5-803-035 Lock
5-803-034 Lock
Reading
1
Normal
Normal
Normal
Normal
379