1: Enable (Active)
3-
Not used
7
Communication Switch 05 (SP No. 1-104-006)
No
Function
0-
Remote mode switch
3
number
00-09 (0-9:HEX)
4-
Not used
7
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 (SP No. 1-104-009)
No
Function
0-
Minimum interval between automatic
7
dialing attempts
Communication Switch 0A (SP No. 1-104-011)
No
Function
0
Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
1-
Not used
7
Communication Switch 0B (SP No. 1-104-012)
No
Function
0-
Not used
3
4
Printout of the message when
acting as a Transfer Station
0: Disabled, 1: Enabled
5-
Not used
Do not change the settings.
Comments
Enter the number to switch between TEL/FAX modes using the external
phone.
Do not change the settings.
Comments
This value is the minimum time that the machine waits before it
dials the next destination.
Comments
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using normal
memory transmission.
Do not change these settings.
Comments
Do not change these settings.
When the machine is acting as a Transfer Station, this bit determines
whether the machine prints the fax message coming in from the
Requesting Terminal.
Do not change the settings.
4.Service Tables
79