Ricoh MP C307 Field Service Manual page 1138

4.Service Tables
Communication mode
Width and reduction
I/O rate
System Switch 01 - Not used (Do not change the factory settings.)
System Switch 02 (SP No. 1-101-003)
No Function
0- Not used
1
2 Forced reset after
transmission stalls
0: Off
1: On
3 Not used
4 File retention time
0: Depends on User
Parameter 24 [18(H)]
1: No limit
5- Not used
7
System Switch 03 - Not used (Do not change the factory settings.)
System Switch 04 (SP No. 1-101-005)
No Function
56
JBO: JBIG compression (Optional mode)
JBB: JBIG compression (Basic mode)
ECM: With ECM
NML: With no ECM
A4: A4 (8.3"), no reduction
B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
0: 0 ms/line
5: 5 ms/line
10: 10 ms/line
20: 20 ms/line
25: 2.5 ms/line
40: 40 ms/line
• "40" is displayed while receiving a fax message using AI short protocol.
Comments
Do not change these settings.
With this setting on, the machine resets itself automatically if a
transmission stalls and fails to complete the job.
Do not change these settings.
1: A file that had a communication error will not be erased unless the
communication is successful.
Do not change this setting
Comments