Ricoh MP C307 Field Service Manual page 1152

4.Service Tables
0
1
1
6-7 Not used
I-fax Switch 0E - Not used (do not change the settings)
I-fax Switch 0F (SP No. 1-102-016)
No Function
0 Delivery Method for SMTP RX Files
This setting determines whether files received with SMTP protocol are delivered or output immediately.
0: Off. Files received via SMTP are output immediately without delivery.
1: On. Files received via SMTP are delivered immediately to their destinations.
1 Set to select the signature when receiving SMTP mail.
0: No sign
1: Always sign
2 Set to encrypt the data when receiving SMTP mail.
0: No encryption
1: Encryption
3-7 Not used
Printer Switches
Printer Switch 00 (SP No. 1-103-001)
No Function
0 Select page separation
marks
0: Off
1: On
1 Repetition of data when the
received page is longer than
the printer paper
70
1 No setting
0 Individual setting
1 Always sign
Comments
0: If a 2 page RX transmission is split, [*] is printed in the bottom right
corner of the 1st page and only a [2] is printed in the upper right corner of
the 2nd page.
1: If a 2 page RX transmission is split into two pages, for example, [*] [2]
is printed in the bottom right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
•
1: Default. 10 mm of the trailing edge of the previous page are repeated at
the top of the next page.
0: The next page continues from where the previous page stopped without
Comments
This helps the user to identify pages that have been split because
the size of the paper is smaller than the size of the document
received. (When A5 is used to print an A4 size document, for
example.)
Do not change the settings.