Step 3. Install Boards Into The Hp 64700 Card Cage - HP 64782 Series Manual

Step 3. Install Boards into the HP 64700 Card
Cage
WARNING
Before removing or installing parts in the HP 64700 Card Cage, make sure
that the card cage power is off and that the power cord is disconnected.
CAUTION
Do NOT stand the HP 64700 Card Cage on the rear panel. You could damage the
rear panel ports and connectors.
1 Use a ground strap when removing or installing boards into the HP 64700 Card Cage to reduce the risk
of damage to the circuit cards from static discharge. A jack on the rear panel of the HP 64700 Card Cage
is provided for this purpose.
Chapter 1: Preparing the Emulator

Step 3. Install Boards into the HP 64700 Card Cage

11