To Break Emulator Execution On The Analyzer Trigger - HP 64746 User Manual

To break emulator execution on the analyzer
trigger
• Enter a trigger state specification in the entry buffer; then, choose Trace→Until ().
• When displaying memory in mnemonic format, position the mouse pointer over the
program line which you wish to trace before, press and hold the select mouse
button and choose Trace Until from the popup menu.
• Using the command line, use the break_on_trigger option to the trace command.
The break_on_trigger option to the trace command allows you to cause the
emulator to break when the analyzer finds the trigger state.
Note that the actual break may be several cycles after the analyzer trigger.
Examples
To trace before source line 101 and cause the emulator to break into the monitor
when the analyzer triggers:
trace before address main."main.c": line 101
break_on_trigger <RETURN>
Chapter 7: Using the Emulation Analyzer
Qualifying Trigger and Store Conditions
265