Deleting A Plan Backup - Nortel 2350 Reference Manual

472 Changing WLAN Management Software Services Preferences
• File—Activates the box in the File area of the dialog. This option allows you to save a copy of
the backup in another folder. For example, if NETS requests a copy of the backup for
troubleshooting, this option enables you to save the backup to a location from which your FTP
application can access the file. Go to
6
Type the IP address of the host where the other instance of WMS Services is installed.
Note.
the backup.
7
If the port on which the other instance of WMS Services listens for traffic from WMS is different from
the default, edit the number in the Service Port box to match.
8
Type the username and password required by the other instance of WMS Services.
9
Click Transfer.
10 Click Next.
The status is displayed in the Status window. Click Close to close the dialog.
11 On the other server (the one to which you copied the backup), access the Backup/Restore pagedialog.
12 Select the backup and click Restore.
13 Click Close to close the dialog.
14 Select File > Save from the menu bar in the main WMS window to save the plan. This completes the
procedure.
15 To change the destination path, click on the path. The Select dialog appears.
16 Navigate to the new destination, then click Select.
17 Click Next.
The status is displayed in the Status window. Click Close to close the dialog. This completes the
procedure.

Deleting a Plan Backup

To delete a plan backup
1
Select Services > Backup & Restore.
If WMS Services is already open in the browser window, select Plan Management, then select Backup &
Restore.
1
Access the Backup/Restore dialog.
2
Select the backup and click Delete.
3
Click on the backup you want to delete.
4
Click Delete.
5
Click Close to close the dialog.
NN47250-102 (320666-G Version 02.01)
WMS Services must be running on the host to which you want to transfer
step 15.