Target; Notification Target - Nortel 2350 Reference Manual

188 Configuring WSS System Parameters
If you select Hex or IP, type the hexadecimal string or IP address in the Value box.
To configure authentication and encryption settings, finish this procedure, then select the USM user
and click Properties.
13 Click Next.
14 For SNMPv2c or SNMPv3, select the notification type:
• Inform—The switch expects to receive acknowledgements from the notification target.
• Trap—The switch does not expect to receive acknowledgements from the notification target.
15 To change the acknowledgement settings for informs, specify the following:
a
In the Timeout box, specify the number of seconds you want the switch to wait for
acknowledgement of a notification. You can specify from 1 to 5 seconds. The default is 2.
b
In the Retry Count box, specify the number of times the WSS Software SNMP engine will resend a
notification that has not been acknowledged by the target. You can specify from 0 to 3 retries. The
default is 0.
16 Click Finish.
Modifying a USM User, Notification Profile, or Notification Target
1
Select the object you want to modify.
2
Click Properties.
3
Make the changes.
4
Click OK.
For information about the settings you can modify, see the descriptions in the following sections:
• "Configuring a USM (SNMP V3) User" (page 183)
• "Configuring a Notification Profile" (page 185)
• "Configuring a Notification Target" (page 185)
Configuring WLAN Management Software Services as a Notification Target
1
Access the Setup WLAN Management Software Notification Target wizard:
a
Select the Configuration tool bar option.
b
In the Organizer panel, click the plus sign next to the WSS.
c
Click the plus sign next to System.
d
Select Management Services.
e
In the Task List panel, select WLAN Management Software Notification Target.
2
In the Security Model drop-down list, select the security model to use specifically for SNMP
communications between the switch and WLAN Management Software:
❍
❍
3
If you selected USM, then select the minimum level of security for SNMP communication between the
switch and WLAN Management Software Services:
NN47250-102 (320666-G Version 02.01)
USM (SNMPv3)
V1