Creating A Policy; Configuring Feature Settings In A Policy - Nortel 2350 Reference Manual

346 Configuring and Applying Policies

Creating a Policy

1
Access the Create Policy wizard.
a
Select the Policies tool bar option.
b
In the Policy DB Tasks List panel, select Create Policy.
2
In the Policy Name box, type a name for the policy. This name will appear in the Organizer panel when
the Policies tool bar option is selected.
3
To configure a policy for a specific switch model, select the model from the WSS Model Filter drop-down
list.
4
To configure the policy to support an older version of WLAN Management Software than is currently
running, select the version from the WSS Version Filter drop-down list.
5
Click Next.
6
Select the feature areas you want to set in the policy.
When you apply the policy to a switch, all parameter settings from all the feature areas you select are
applied to the switch. This includes any settings you leave at their default settings in the policy.
7
Click Next.
8
In Available Devices list, select the switches to which you want to apply the policy, then click Add to
move the switches to the Current Devices list.
Note.
the policy to the switch. To apply policy settings, see
Switches" (page
9
Click Finish and go to

Configuring Feature Settings in a Policy

1
If you have not already done so, use the procedure in
and select the switches to which you want to apply the policy.
2
In the Organizer panel, select a feature area.
3
Use the Content panel or wizards accessed from the Task List panel to configure settings for the feature
category.
To find information about a feature category, see
4
Click Save to save the changes to the policy.
5
In the Task List panel, select View to display the switches to which the policy change will apply.
Only the settings you change from their default values are listed.
6
After you review the changes, click Close.
7
Correct any changes if needed, then go to
NN47250-102 (320666-G Version 02.01)
Moving a switch to the Current Devices list does not automatically apply
347).
"Configuring Feature Settings in a Policy" (page
"Applying Policy Changes to
"Creating a Policy" (page 346)
Table 1.
"Applying Policy Changes to Switches" (page
346).
to configure a policy
347).