5
In the Name box, type a name for the access point. You can use 1 to 32 characters, with no punctuation
except the following: period (.), hyphen (-), or underscore (_).
6
Optionally, in the Manufacturer ID box, type the manufacturer identification for the access point (1 to 30
characters, with no spaces).
7
In the Product ID box, type the product identification for the access point (1 to 30 characters, with no
spaces).
8
In the IP Address box, type the IP address for the access point.
If you specify an IP address, you can use Telnet and a Web browser with this access point.
9
In the Telnet Port Number box, specify the port number for Telnet service.
10 In the HTTP Port Number box, specify the port number for HTTP service.
11 Click Next. The following dialog appears:
Nortel WLAN—Management Software 2300 Series Reference Guide
Planning the Nortel WLAN 2300 System 133