Nortel 2350 Reference Manual page 339

• If you are reenabling a rule, go to
• If you are disabling a rule, go to
5
In the Rule column, click on the rule name. The disable settings are displayed and become editable.
• If the rule is disabled for all instances, the Disable All Instances option is selected.
• If individual instances of the rule are disabled, the Disable Selected Instances option is selected
and the instances are listed. Instances that are disabled have checkmarks in the checkboxes
next to them.
6
Reenable the rule or instances:
• To reenable a rule all of whose instances are disabled, click on the checkbox in the Enabled
column. The Disable All Instances option is deselected.
• To reenable an individual instance of a rule, click on the checkbox next to the instance. Repeat
for each instance you want to reenable. Alternatively, if you want to reenable all the disabled
instances, you can click on the checkbox in the Enabled column.
7
Go to step 10.
8
Click on the checkbox in the Enabled column. The disable options become editable. By default, the
Disable All Instances option is selected.
9
To leave all instances disabled, go to
To disable only specific instances:
a
Select Disable Selected Instances. The individual instances of the rule are listed.
b
Click next to the instances you want to disable, then go to
10 Click Close.
step
step 8.
step 10.
Nortel WLAN—Management Software 2300 Series Reference Guide
Verifying Configuration Changes 339
5.
step 10.