Figure 2: Entering the ADL parameters
7. Click
Validate
The page refreshes. A new
appears. Messages describing any problems appear in the message
area. If there are no errors, the message
found
is displayed in the message area.
8. Correct any errors in the data.
9. Repeat steps 7 and 8 until no errors are found.
10. Click
Save
to save the new data configuration.
11. Schedule the data synchronization.
Deleting an Auto Dial key
To remove the ADL function from a key on your telephone:
1. Scroll down until the ADL key is visible in the
Telephone Details
The existing parameters are displayed in the
2. Choose
NUL - Unassigned
column.
The
Telephone Details
Unassigned
parameters in the
3. Click
Validate
The page refreshes. A new
appears. Messages describing any problems appear in the message
area. If there are no errors, the message
found
is displayed in the message area.
4. Correct any errors in the data.
on the
Telephone Details
Validation errors
page.
from the drop-down list in the
page refreshes. The key type
is displayed in the
Key Value
column.
on the
Telephone Details
Validation errors
Using Desktop Services
page.
message area
No validation error(s) were
Keys
Key Value
Key Type
column and there are no
page.
message area
No validation error(s) were
section of the
column.
Key Type
NUL -
19