Nortel 2350 Reference Manual page 102

102 Planning the Nortel WLAN 2300 System
To use the Create RF Obstacle Dialog box
The Create RF Obstacle dialog box is shown in
Figure 4: Create RF Obstacle Dialog Box
1 In the Description box, type a description for the RF obstacle (1 to 60 characters, with no tabs).
2 In the Obstacle Type list, select the material of which the RF obstacle is made.
Select Other if the material is not listed. This allows you to create your own obstacle type.
3 In the Attenuation Factor boxes, specify the attenuation factor for 802.11a and 802.11b/g technology
(0 to 100 dB). The default is the typical attenuation factor for the material chosen.
4 Click Finish to save the changes and close the dialog box.
• If you created RF obstacles for all objects in a layer, all objects in the layer are converted into
separate RF obstacles.
• If you created RF obstacles for an area, all objects in the area are converted into separate RF
obstacles.
• If you created RF obstacles for multiple selected objects, all objects you selected are converted
into separate RF obstacles.
• If you created RF obstacles for grouped objects, each grouped object is converted into a single
RF obstacle.
NN47250-102 (320666-G Version 02.01)
Figure 4.