Generating Rf Network Design Information - Nortel 2350 Reference Manual

154 Planning the Nortel WLAN 2300 System

Generating RF Network Design Information

After WMS has calculated the number of APs required to provide wireless coverage, you can generate a work order
report. The work order report provides all of the necessary information for the physical installation of the Nortel WLAN
2300 System. A work order shows where the APs should be installed, WSS initial setup configuration information, and
projected RSSI information that is useful when verifying the installation.
After deployment, you can generate a work order with the optional RSSI projection tables and AP MAC addresses, and
use it for post-deployment verification.
To generate a work order report
1
Display the floor plan in the Content panel.
2
In the Task List panel, click RF Planning.
3
Under RF Planning, click Work Order Report. The Work Order Generation dialog is displayed.
4
Specify whether to include the following information in the work order:
• RF Coverage
• RSSI Projections
• Show Disabled APs (only available if RSSI Projections is selected)
• Show RF Coverage On Entire Floor (only available if RSSI Projections is selected)
NN47250-102 (320666-G Version 02.01)