Creating Or Modifying Buildings In A Site - Nortel 2350 Reference Manual

4 In the Site Name box, type a name for the site (1 to 80 alphanumeric characters, with no spaces or tabs).
5 To change the Country Code, select Setup Country Code in the Task List panel, then in the Change
Country Code dialog, select the country where the network is to be deployed.
Note. For Series 2332 access points, be sure that the selected country code is
supported by the associated model before changing to it. If the country code is not
supported, the Series 2332 access point will not operate and an error will be
generated. For a complete listing of the Series 2332 access point models and their
associated countries please visit the Nortel Support website:
http://www.nortel.com/support.
6
In the Channel Set (802.11b/g) list, select the set of operating channels for any 802.11b/g AP radios you
plan to use (if different from the default).
From the Content panel, you can also change the properties of existing buildings at the site. See
Buildings in a Site" (page 81)

Creating or Modifying Buildings in a Site

To create or modify a building
1
Select the RF Planning tool bar option.
2
In the Organizer panel, click the site name.
3
Do one of the following:
next for more information.
Nortel WLAN—Management Software 2300 Series Reference Guide
Planning the Nortel WLAN 2300 System 81
"Creating or Modifying