Nortel 2350 Reference Manual page 307

Configuring Authentication, Authorization, and Accounting Parameters 307
d Select Mobility Profiles.
e In the Task List panel, select Create Mobility Profile.
2 In the Profile Name box, type the name of the Mobility Profile.
The name can be up to 16 alphanumeric characters, and it cannot contain tabs.
3
Click Next.
4
In the Ports drop-down list, select the ports to include in the Mobility Profile:
• All—Include all AP or wired authentication ports.
• Selected—Include a selected list of ports.
• None—Include no ports.
If you select Selected, select the individual ports in the Available Physical Ports list and click
Add.
5
Click Next.
6
In the Distributed APs drop-down list, select the Distributed APs to include in the Mobility
Profile:
• All—Include all Distributed APs.
• Selected—Include a selected list of Distributed APs.
• None—Include no Distributed APs.
If you select Selected, select the individual APs in the Available Distributed APs list and click
Add.
7
Click Finish.
Nortel WLAN—Management Software 2300 Series Reference Guide