Converting Auto Daps Into Statically Configured Daps - Nortel 2350 Reference Manual

Wlan-management software 2300 series
Hide thumbs Also See for 2350:
Table of Contents

Advertisement

3
In the Task List panel, select System Information.
The System Information wizard appears.
4
In the Contact box, type the contact name for the WSS.
5
In the Location box, type the location of the WSS.
6
In the Prompt box, type the CLI prompt for the WSS.
If you do not specify a prompt, the CLI uses the following default prompts:
WSS-mm-nnnnnn> for restricted access
WSS-mm-nnnnnn# for enabled access
The mm portion of the prompt shows the WSS switch's model number. The nnnnnn portion of the prompt shows the last
6 digits of the WSS's MAC address.
7
In the Message of the Day box, type the message that appears before the beginning of each login prompt
of each CLI session. Do not use the number sign (#), single quotation mark ('), double quotation marks ("
"), or ampersand (&).
8
Click OK.

Converting Auto DAPs into Statically Configured DAPs

Distributed APs that are not configured on any WSSs in the Mobility Domain can nonetheless be booted and managed
by a switch if the switch has a profile for Distributed APs, and has capacity to manage the AP. An AP that is booted and
managed using a Distributed AP profile is here called an Auto DAP.
You can convert the temporary connection of an Auto DAP to a WSS into a permanent, statically configured connection
on the switch.
Note.
This procedure converts Auto DAPS into configured Distributed APs only on the
switch you are managing. To convert Auto DAPs on a Mobility Domain basis, see
"Converting Auto DAPs into Statically Configured APs" (page
To convert an Auto DAP
1
Select the Configuration tool bar option.
2
In the Organizer panel, select the WSS.
3
In the Task List panel, select Convert Auto APs.
The Convert Auto APs wizard appears. The APs that were configured using a Distributed AP template are
listed.
4
Select the APs you want to convert into statically configured APs.
5
Click Next.
6
Click Finish.
Nortel WLAN—Management Software 2300 Series Reference Guide
Configuring WSS System Parameters 171
74).

Advertisement

Table of Contents
loading

This manual is also suitable for:

2360236123802382

Table of Contents