Creating A Location Policy Rule - Nortel 2350 Reference Manual

The configured location policy rules appear.

Creating a Location Policy Rule

1 Access the Create Location Rule wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WSS.
c Click the plus sign next to AAA.
d
Select Location Policy.
e
In the Task List panel, select Create Location Policy Rule.
2
To match on SSID, select Equal and type the SSID name in the box.
3
Click Next.
4
To match on user wildcard, select one of the following:
• Equal—Apply the location policy to all usernames matching a specified user wildcard. In the
User Wildcard box, type the user wildcard for the users to which the location policy applies.
• Not Equal—Apply the location policy to all usernames not matching a specified user wildcard.
In the User Wildcard box, type the user wildcard for the users to which the location policy
does not apply.
Type the user wildcard in the box. When specifying a user wildcard, enter a username, a double-asterisk
wildcard character (**) to specify all usernames, or a single-asterisk wildcard character (*) to specify a
set of usernames up to or following the first delimiter character, either an at sign (@) or a period (.).
5
To match on VLAN, select one of the following:
• Equal—Apply the location policy to all users with a specified VLAN. In the VLAN box, type
the name of the VLAN.
• Not Equal—Apply the location policy to all users whose assigned VLAN does not match a
specified VLAN. In the VLANs box, type the name of the VLAN.
Type the VLAN name in the box. To match on multiple VLAN names, use the the single-asterisk
wildcard character (*) in the string. To match on all VLAN names, use the double asterisk (**) and no
other characters.
6
Click Next.
7
Select the ports for which the location policy is applied and click Add.
8
Click Next.
9
Select the Distributed APs for which the location policy is applied and click Add.
10 Click Next.
11 In the Action list, select one of the following:
• Permit—Allows access if the conditions in the location policy rule are matched.
If you select Permit, you must specify at least one of following:
•
•
•
Configuring Authentication, Authorization, and Accounting Parameters 305
In ACL Name—ACL applies to packets sent to the WSS (See
Out ACL Name—ACL applies to packets sent from the WSS (See
VLAN Name (See step 14.)
Nortel WLAN—Management Software 2300 Series Reference Guide
step 12.)
step 13.)