Using The Create Wlan-Security Switch Wizard - Nortel 2350 Reference Manual

164 Configuring WSS System Parameters
Using the Create WLAN—Security Switch Wizard
1
Access the Create WLAN—Security Switch wizard:
a
Select the Configuration tool bar option.
b
In the Organizer panel, select the network plan name.
c
In the Task List panel, select the WLAN—Security Switch task.
2
In the WSS Name box, type the name of the WSS (1 to 256 alphanumeric characters, with no spaces or
tabs).
Note.
unique name.
3
In the WSS Model list, select the WSS model.
4
In the Software Version list, select the version of WLAN Security Switch 2300 Series (WSS Software)
you expect to run on the WSS.
5
In the Enable Password box, type the enable password for the WSS.
This password must match the enable password that was defined on the switch using the CLI command
set enablepass. For more information, see the
Guide.
The password is encrypted when you type it.
6
Click Next.
7
Enter the IP address and network mask in the IP Address field.
WLAN Management Software will assign this IP address to the default VLAN (VLAN 1).
8
Click Next.
9
In the Available Members list, select the ports to add to the default VLAN and click Add or Move.
• The Add button adds the ports to the new VLAN without removing them from any other
VLANs.
• The Move button removes the ports from all other VLANs, and places them in the new VLAN.
The ports appear in the Current Members list.
10 To tag ports in the VLAN, select Tag and edit the tag value.
Use this option if you used the Add button instead of the Move button to place the ports in the VLAN.
For a port to be a member of more than one VLAN, the port must be tagged. By default, ports are
untagged. When you enable tagging, the default tag value is the same as the VLAN ID.
11 Click Next.
12 Edit the IP address to match the address of the default router for the default VLAN's IP interface.
13 Click Next.
14 To place the switch in a Mobility Domain, select the Mobility Domain from the Mobility Domain
drop-down list.
NN47250-102 (320666-G Version 02.01)
Within a network plan (and all Mobility Domains), each WSS must have a
Nortel WLAN Security Switch 2300 Series Configuration