Nortel 2350 Reference Manual page 135

15 Verify the radio slot number and radio type.
For a dual-radio access point, 802.11b/g radios have a slot number of 1. 802.11a radios have a slot
number of 2.
16 In the Channel Number list, select the channel number for the radio.
17 In the Transmit Power box, specify the transmit power for the radio.
18 To enable the radio, select Enabled.
Note. The access point's radio must be enabled in order to be considered in
channel allocation.
19 In the SSID box, type the service set identifier (SSID) for the radio.
20 In the MAC Address box, type the MAC address of the radio.
21 In the Antenna Gain list, select the antenna gain for the radio.
22 If the access point has only one radio, click Finish. Otherwise, go to
23 Click Next. The Radio A page appears.
24 Repeat step 15 through
25 Click Finish to save the changes.
step 21 for the 802.11a radio.
Nortel WLAN—Management Software 2300 Series Reference Guide
Planning the Nortel WLAN 2300 System 135
step 23.