Creating A Mac User; Creating A Mac User Group And Assigning Users To It - Nortel 2350 Reference Manual

280 Configuring Authentication, Authorization, and Accounting Parameters

Creating a MAC User

1
Access the Create MAC User wizard:
a
Select the Configuration tool bar option.
b
In the Organizer panel, click the plus sign next to the WSS.
c
Click the plus sign next to AAA.
d
Select Local User Database.
e
In the Task List panel, select Create MAC Address User.
2
In the User MAC Address box, type the MAC address for the user device, using colons (:) as
delimiters. You must specify all 6 bytes of the MAC address.
3
In the MAC User Group list, select the MAC user group that the user device belongs to, if the
group is already configured.
4
To set authorization attributes for the user, click Next and go to
Otherwise, if you plan to set authorization attributes in another way, such as adding the user to
a group or configuring default AAA attribute values for the SSID the user will access, click
Finish.
5
In the VLAN Name box, select or type the name of the VLAN that the user device belongs to
(1 to 16 alphanumeric characters, with no spaces or tabs). The WSS will authorize the user for
that VLAN. For more information on VLANs, see
(page 196).
6
In the attribute row you want to configure, click the Attribute Value column.
See Table 1 (page 281)
7
Type the new attribute value in lowercase characters. ACL names are case-sensitive.
8
Repeat step 6
9
Click Finish.

Creating a MAC User Group and Assigning Users To It

1
Access the Create MAC User Group wizard:
a
Select the Configuration tool bar option.
b
In the Organizer panel, click the plus sign next to the WSS.
c
Click the plus sign next to AAA.
d
Select Local User Database.
e
In the Task List panel, select Create MAC User Group.
2
Enter the name in the Name box. Specify a name of up to 32 alphanumeric characters, with no
spaces. The name must begin with an alphabetic character.
3
Click Next.
4 In the VLAN Name box, select or type the VLAN that the group belongs to (1 to 16
alphanumeric characters, with no spaces or tabs). The WSS will authorize the MAC users in
NN47250-102 (320666-G Version 02.01)
for a description of user attributes and their values.
and step 7 for each attribute value you want to change.
step 6.
"Viewing and Configuring VLANs"