Generating A Client Errors Report - Nortel 2350 Reference Manual

380 Generating Reports
5
Click on the Select field, and select one of the following from the drop-down list:
• User Name
• IP Address
• MAC Address
6
Click on the Value field. Erase the text in the field and type the username, IP address, or MAC address of
the user, depending on the selection criterion you specified in
7
Press Enter to complete the filter.
8
Repeat step 4
9
Click Next.
10 When the report is generated, click the report link to view it.
The client details report contains the following sections:
• Session Properties
• Location History
• Session Statistics
• Current AP Statistics
• Lifetime AP Statistics

Generating a Client Errors Report

The client errors report lists error statistics for current client sessions.
Note.
The data for this report comes from WLAN Management Software Services. The
Enable RF trending option, located in the RF Monitor group box, must be enabled. (See
"Changing Monitoring Settings" (page
To generate a client errors report
1
Select the Reports tool bar option.
2
In the Reports list, select Client Errors.
3
Click Generate.
4
Select the scope type of the report from the Report Scope Type drop-down list:
• Mobility Domain
• WLAN—Security Switch
• Site
• Building
• Floor
NN47250-102 (320666-G Version 02.01)
through step 7 for each user you want to display details for.
466).)
step 5.