438 Detecting and Combatting Rogue Devices
The client is most likely in the vicinity of the area indicated by the red squares in the floor plan. The number in
red on the legend (0.90 in this example) is the probability (90%) that the client is where the display indicates.
Ignoring Friendly Third-Party Devices
By default, when countermeasures are enabled, WSS Software considers any third-party transmitter to be a
rogue device and can send countermeasures to prevent clients from using that device. To prevent WSS
Software from sending countermeasures against a friendly device, add the device to the ignore list.
Each WSS has its own ignore list. You can add an address to the ignore list of one or multiple switches.
To add a device to the ignore list
1
In the list of rogues on the Alarm screen, select the devices you want to add to the ignore list.
NN47250-102 (320666-G Version 02.01)