Changing Time Zone Properties; Changing System Information - Nortel 2350 Reference Manual

170 Configuring WSS System Parameters
The Change Model wizard appears.
4
Select the model from the drop-down list.
5
Click OK.

Changing Time zone Properties

You can specify the number of hours (and optionally the minutes) that the WSS's real-time clock is offset from Coordi-
nated Universal Time (UTC)—also known as Greenwich Mean Time (GMT). The time zone information is used by
Network Time Protocol (NTP) if you enabled it.
You can also specify whether the WSS modifies the clock during daylight savings time or similar summertime period.
1
Select the Configuration tool bar option.
2
In the Organizer panel, select the WSS.
3
In the Task List panel, select Timezone.
The Timezone Properties wizard appears.
4
In the Name box, type the name for the time zone (1 to 16 alphanumeric characters, with no spaces or
tabs).
5
In the Offset Hours box, select the number of hours (between -23 and 23) to subtract from or add to UTC.
6
Optionally, in the Offset Minutes box, select the number of minutes (between -59 to 59) to subtract from
or add to UTC.
1
In the DST Name box, type the name for the summertime offset (1 to 16 alphanumeric characters, with
no spaces or tabs).
2
In the Start Month list, select the month of the year when the time change starts.
3
In the Start Week list, select the week of the month when the time change starts (First, Second, Third,
Fourth, or Last).
4
In the Start Day list, select the day of the week when the time change starts.
5
In the Start Hour box, specify the hour (between 0 and 23) to start the time change.
6
In the Start Minute box, specify the minute (between 0 and 59) when the time change starts.
7
In the End Month list, select the month of the year when the time change ends.
8
In the End Week list, select the week of the month when the time change ends (First, Second, Third,
Fourth, or Last).
9
In the End Day list, select the day of the week when the time change ends.
10 In the End Hour box, specify the hour (between 0 and 23) when the time change ends.
11 In the End Minute box, specify the minute (between 0 and 59) when the time change ends.
12 Click OK.

Changing System Information

1
Select the Configuration tool bar option.
2
In the Organizer panel, select the WSS.
NN47250-102 (320666-G Version 02.01)