Nortel 2350 Reference Manual page 54

54 Getting Started
• If you are starting WLAN Management Software for the first time, or you have not previously activated your
licences, a license message appears.
• If you have already activated the license(s), you can do one of the following:
• Edit the currently loaded network plan.
If this is a new installation of WLAN Management Software, a network plan called Default is
opened. You can edit this plan, use the Save As page under Services > Plan Management to save it
under a new name, or close it and start a new plan by using the New Plan page under Services >
Plan Management.
If you are upgrading from an earlier version of WLAN Management Software, the plan that was last
opened using the previous version is opened again.
• Create a new network plan. (Use the New Plan page under Services > Plan Management.)
• Switch to an existing network plan. You can open one of the sample plans included with
WLAN Management Software or a plan that you or another WLAN Management Software
user has saved on the WMS Services host.
To open an existing network plan, use the Switch Plan page under Services > Plan Management
and select the network plan from the list of available network plans. WLAN Management Software
connects to the WLAN Management Software Services host and opens the specified network plan
on the server. See
WLAN Management Software has two sample plans:
❍
❍
NN47250-102 (320666-G Version 02.01)
"Managing Network Plans" (page 61)
QuickStart—Contains a two-floor building with two WSSs and two APs on each switch. Each
switch and its APs provide coverage for a floor. The Nortel equipment is configured to provide
both clear (unencrypted) and secure (802.1X) wireless access. (For more information, see the
Nortel WLAN Security Switch 2300 Series Quick Start
StarterKit—Contains a simple rectangle as a floor plan, but with one WSS and four APs.
for more information.
Guide.)