Synchronizing Local And Network Changes; Reviewing Switch Configuration Changes - Nortel 2350 Reference Manual

Option
Launch WLAN
Management
Software HTML
Help
Update status for
all devices
Edit managed
devices options
Upload WSS
Options

Synchronizing Local and Network Changes

Whenever configuration changes occur to a switch, WLAN Management Software alerts you that changes have
occurred. If a configuration change occurs on a switch in the network or in the network plan, so that the network and
network plan are out of sync, WLAN Management Software displays a message in a popup window to alert you that a
change has occurred.
The Devices tab enables you to review changes and synchronize the switches in the network with their counterparts in
WLAN Management Software by either copying the changes to the other switch, or removing the changes from the
switch that was changed.
A row of information is displayed for each switch. The Local Status and Network Status columns indicate where
changes have occurred.

Reviewing Switch Configuration Changes

1
Select the Devices tool bar option.
2
At the bottom of the Task List panel, select Change Management.
3
Select one or more WSSs.
To select multiple switches, press Shift (for contiguous switches) or Control (for noncontiguous
switches) while clicking.
4
In the Local Changes or Network Changes group in the Task List panel, select Review.
Managing WSS System Images and Configurations 325
Table 3: Toolbar Options on Devices Tab
Description
Opens the HTML version of this manual.
Refreshes the data for all devices.
Opens the Managed Devices Options dialog box, which lets you modify
parameters used to poll switches for configuration changes.
(See "Modifying Configuration Change Polling Options" (page
Opens the Upload WLAN—Security Switch dialog box, which lets you add a
new switch to the network plan by copying the configuration from a switch
already running in the network.
(See "Adding a Switch by Uploading its Configuration from the Network"
(page 162).)
Opens the Managed Devices Options dialog box, which lets you modify
parameters used to poll switches for configuration changes.
(See "Modifying Configuration Change Polling Options" (page
Nortel WLAN—Management Software 2300 Series Reference Guide
334).)
334).)