Nortel 2350 Reference Manual page 145

4 To change the starting floor for channel assignment, select the floor from the Begin On Floor List. By
default, WLAN Management Software starts at the top floor and works down.
5 To change the ending floor for channel assignment, select the floor from the End On Floor List.
The ending floor number must be lower than or equal to the starting floor number.
6 To change the radio type for which to assign channels, select the radio type from the Technology list. By
default, WLAN Management Software assigns channels for all radio types on the APs placed in the
building.
7 To prevent WLAN Management Software from taking the channel assignments for the floor above into
account when calculating the channel assignments for a floor, clear Use Cross-Floor Channel
Information.
8 Click Next. The Channel Assignment Progress page appears.
9 Review the results. The 802.11a channel assignments are listed on the 802.11a Radio(s) tab. The 802.11b/
g channel assignments are listed on the 802.11b/g Radio(s) tab.
Nortel WLAN—Management Software 2300 Series Reference Guide
Planning the Nortel WLAN 2300 System 145